![]() The doors are hollow metal, so no Blumcraft Lock. The doors are fire-rated doors, so no electrified strike and better not to use magnetic locks. Now, let’s analyze the selection process, step by step: 1. The door is automatically operated so no Rim or Mortise version. This leaves Electrified Panic Hardware, so let's finalize the selection. The doors are automatically operated so any lock requiring coordination of the two door leaves is out (Electrified Mortise Lock, Electrified Cylinder Lock, 3-point Locking Mechanism, Securitech Locks, and Hi-Tower Lock). The doors are fire-rated doors, so no Electrified Strike and better not to use Magnetic Locks. Now, let's analyze the selection process, step by step: A. The pocketed coil will wrap around the frame to accommodate the fully open door. In these instances, one can use either electrified pivots (the top pivot is wired) or the pocketed coil (through which wiring is threaded). In either case, electrified hinges and EPTs will not work. ![]() In such cases, a special type of hinge is used or the door may open on pivots (both of which place the hinge point outside the frame to allow the door to swing 180 degrees). However, doors can also be fitted into frames so that they swing to full open at 180 degrees, flat against the wall. ![]() Hinges perform this function and, for electrification of the mortise lock, the installer can use either electric hinges or the EPT unit. Doors are commonly fitted into frames so that the door swings 90 degrees to full open. Norman CPP/PSP, in Electronic Access Control (Second Edition), 2017 Door frame considerationsĮlectrified mortise locks may require different wiring provisions depending on the type of frame into which the door is set.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |